KittWay: the advanced GPS tracker


The invisible GPS tracker

Install your GPS tracker KittWay and hide it anywhere thanks to the external GPS antenna.


All information

Monitor all aspects of the vehicle, thanks to the direct connection to its control unit.


Instant diagnostics

Keep up with the vehicles’ diagnostics by getting all notifications sent directly to the tracking platform.


Dual antenna

The GPS tracker has unparalleled satellite reception thanks to the dual GPS and GLONASS antenna feature.

the compact GPS tracker and locator featuring multiple I/O interfaces designed for a wide variety of uses

Powerful GPS tracker

KittWay is a compact GPS tracker and locator designed for a wide variety of uses. Featuring multiple I/O interfaces, it can monitor and manage all types of external sensors and equipment.

Compact and complete

This compact tracker is designed for hidden installation within the vehicle. It features an internal and external GPS antenna and internal backup battery.

Smart technology

The integrated GPS receiver has superior sensitivity and fast time to first fix. The external antenna enables the device to be hidden anywhere, making it completely invisible when installed.

Driver management

The 3-axis accelerometer, which detects motion, identifies inappropriate driving styles by recognizing hard braking and aggressive acceleration. It also detects direction, idling, device connections and disconnections, etc. Used with the driver ID kit with RFID card reader, makes the GPS tracker a complete driver management system.

Real time management

Thanks to the Quad-band GPRS/GSM chipset that supports 850/900/1800/1900 MHz, KittWay is able to send its position to the MyWakes platform in real time.

In the event of network failure, KittWay will start saving the position in its internal memory (up to 10’000 positions) and as soon as the connection is restored, it will send the entire memory to MyWakes.

with its 3-axis accelerometer identifies inappropriate driving styles by recognizing hard braking and aggressive acceleratio

The GPS tracker that don’t miss a point

The GPS tracker uses the internal memory to save tracks when no GPRS signal is available.

As soon as the signal is restored, KittWay will download the buffer onto the platform, showing you all the points.

GPS tracker internal battery

Raise an alarm if the KittWay is disconnected from the vehicle and it will continue to trace.

Infinitely expandable

It allows you to set options such as remote control, it detects a wide range of events, it reads CAN bus data and, through the external sensors, it detects fuel level and temperature, it identifies drivers, it interacts with the Garmin navigation system, it monitors driving styles and it does much more.

Input/output interfaces

KittWay features input interfaces for the connection of numerous sensors and output communication ports. A serial interface enables connection of the fuel level sensor, temperature sensors, video camera, Garmin navigation system or CAN bus reader.

GPS specifications


Autonomous: -147 dBm

Hot start: -156 dBm

Reacquisition: -160 dBm

Tracking: -162 dBm

GPS Chipset

u-blox All-In-One GPS receiver


Autonomous: < 2.5m

SBAS: < 2.0m

TTFF (Open Sky)

Cold start: 27s media

Warm start: 27s media

Hot start: 1s media

General specifications

Dimensions and weight

80mm*49mm*26mm; 72g


Li-Polymer 250 mAh


da 8V a 32V DC

Operating temperature

-30℃ ~ +70℃; -40℃ ~ +80℃ for storage

Frequency specifications


Class 4 (33±2 dBm) for GSM 850 and EGSM 900

Class 1 (30±2 dBm) for DCS 1800 and PCS 1900

Class 3 (24+1/-3 dBm) for UMTS 850/1900/2100


HSDPA data rate equal to 3GPP R5. 3.6 Mbps download

WCDMA data rate equal to 3GPP R99/R4. 384 kbps downlaod and 384 kbps upload

Supports modulation 16-QAM e QPSK


GPRS multi-slot class 12; GPRS mobile station class B


Support GPRS multi-slot class 12 (10 by default)

Coding scheme: CS-1, CS-2, CS-3, CS-4

Max four Rx time slots per frame


HSDPA R5: Max 3.6 Mbps (DL)

WCDMA R99: Max 384 kbps (DL)/Max 384 kbps (UL)

GPRS: Max 85.6 kbps (DL)/Max 85.6 kbps (UL)


Digital input

Three digital input

One positive trigger for ignition

Two negative input triggers

Two way audio

Two differential output with one single input

LED indicators

CEL, GPS and power

Customizable input

One input can be set digital or analog (0-16V)

Digital output

One digital output with internal circuit, 150 mA max

Mini USB port

Mini USB port for upgrading and debugging

Analog input

One analog input (0.3-16V)

UMTS/HSDPA and GSM antennas

Internal antennas

Serial port

One RS232 serial port with 16 pin molex connector, to connect external devices (also with GARMIN FMI protocol support)

Digital output

Two digital output, open drain, 150 mA max

GPS Antenna

Internal, optionally external

Inserting and Creating Point of Interest (POI)

From now you can have POI on all your tracks and maps of the Pickway and Keepway devices. A POI is a point that can be of and kind of interest, like a Parking area or a Tutor, from restaurant to airports. Every user can create his own point of interest or even...

read more

MyWakes is at Parma Fair: Salone del Camper

The Hall of the Camper From the 13 to the 21September of 2014, Wewill bepresent to the Fair of Parma “the Hall of the Camper”, Stand"HELLO CAMPING".  We wait for to you with our products, in order to discover with all the...

read more

KittWay GPS Tracker @ Shop

Iscriviti alla nostra newsletter

Iscriviti alla nostra newsletter

Inserisci il tuo indirizzo e-mail per ricevere aggiornamenti da MyWakes.

Grazie per esserti iscritto alla newsletter MyWakes !